Friday, September 20, 2019

MAINTENANCE PROCESS OF PRESSURE WASHER


Many like to go with maintenance their pressure washer occasionally. But it is better to follow a routine for maintaining a pressure washer.
Consider the reasons to engage in routine maintenance for your pressure washer:
-protect from getting broken
-safe you from expensive repair
-make sure of better performance continuously
- run with causing no problem
-can run easily 100 hours

Electric Pressure Washer vs Gas

Verify   Leaks / take action if any  Fuel/oil leaks


First, verify oil and fuel leaks. To do this look fuel line, look if any filtrate of surplus oil or fuel of the pump. Even a small leak is found, you do not neglect rather take regular observation along with repair.
To find water leak make on the water supply and then observe if any leak in the water supply system or process.

Check Nozzles:


Find the nozzle carefully if there any debris clears it by unfolding paper clip then put water for the final wash.
- Observe hose connection, if any crack is found. To do this open trigger then observes spring back function. If not up to the level you may remove and set another new one.   
 - If you connect the garden source of water with your pump to supply water for pressure washer examine filter because the filter protects dirt. If required clean or set new filter.
 - Fill the tank with needed fuel. So, open cap, see the level if no fuel or less provide fuel as per direction.
- You can check the dipstick to know about engine oil if needed supply needed engine oil. 

About air filter:


This air filter prevents dirt to get in. To make and keep it clean check and take special care when you operate your pressure washer at dirt place. At first, you take away the filter of the case. To remove the surplus dust put hit to it keeping adjacent to a solid surface just for a little time.  Use a damp rag to
wipe up it. However, if needed replace with a new one.

 About storage:                  


Before storage, some important Acton is to do-
- Certainly, you wash your pump such a manner that there will be no water or detergent in it.  
 - In case of using soap keep away black soap nozzle, set green/white spray tip, make water flow with this new tip to get away the soap .
- Pull off spray trigger after turning the engine off so that rest water will get out.
Cut off the connection of pressure hose from spray gun then make out water from hose. Keep the hose at the store.
 Now you can store your washer-
- Your store place should be
- Dry with no dirt, far away of furnaces and dryers
-Cover your machine with a sheet by that air can pass it will prevent dust

For long-time storage-
-It is wise to arrange fuel stabilizer. It will protect acid and gum.
-You can make empty all the oil
- Do not keep store months with old grimy oil
- use pump saver


Maintenance is a vital action for your pressure washer. You have to maintain your machine with following daily, weekly and monthly schedule. Obviously, you should do some special works before storage for a long reasonable time. Proper maintenance will offer you good service along with long-lasting.


To know more click this link: A Realistic Comparison of ElectricPressure Washer vs Gas Pressure Washer



No comments:

Post a Comment

How to Wash a House to Clean Siding and Gutters Using a Pressure Washer?

For this job at first consider the requirements of tools & other materials. Then take consideration of getting no injure and damage wh...